Compressed air systems are often located where the environment and prevailing atmospheric conditions are particularly corrosive. These applications include chemical and petro-chemical installations, offshore drilling platforms and ships, marine and process industries where problems concerning corrosion are increased.
Manufactured from 316L stainless steel for operating pressures up to 16 barg (232 psig), OIL-Xplus stainless steel compressed air filters are ideal for the highly efficient filtration of compressed air where a compressed air system is installed in a corrosive environment.
Features & Benefits of Parker Domnick Hunter OIL-Xplus Stainless Steel Series Compressed Air Filters:
• Suitable for all compressed air applications and all compressor types
• Coalescing and dust removal filters are covered by one year compressed air quality guarantee which is automatically renewed with annual maintenance
• Filter housings are covered by a 10 year guarantee
• Low lifetime costs
• Delivered air quality in accordance with all editions of ISO8573-1, the international standard for compressed air quality
• Helps reduce the release of CO2 into the environment
Sizing and Selection
To ensure quoted air purity specification is met, more than one filtration grade may be required.
Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the
Product Information Sheet.
For more information or a detailed discussion about your specific requirements please contact us at 727-835-0649 or Toll Free at 800-761-4298.
*Scroll to the right to see entire chart on mobile.
PERFORMANCE CHARACTERISTICS
|
MAXIMUM FLOW RATE (CFM) |
911 @ 100 psig |
CONNECTION TYPE |
BSPP |
FILTRATION EFFICIENCY |
99.925%, to 99.9999% or ISO8573-5 |
MAXIMUM OPERATING PRESSURE (BARG) |
16 |
MAXIMUM OPERATING PRESSURE (PSIG) |
232 |
MAXIMUM OPERATING TEMPERATURE (C) |
30 to 66 |
MAXIMUM OPERATING TEMPERATURE (F) |
86 to 150 |
MINIMUM OPERATING TEMPERATURE (C) |
1.5 |
MINIMUM OPERATING TEMPERATURE (F) |
35 |
DIFFERENTIAL PRESSURE (MBAR) |
Dry: 70 to 100 Wet: 140 to 200 |
DIFFERENTIAL PRESSURE (PSI) |
Dry: 1 to 1.5 Wet: 2 to 3 |
RESIDUAL OIL CONTENT |
0.01mg/3 0.01 ppm(w) @ 21C (70F), 0.01 mg/m3 0.5 ppm(w) @ 21C (70F),
n/a, 0.003mg/m3 0.003 ppm(w) @ 21C (70F) |
ELEMENT CHANGE INTERVAL |
12 months or when odors can be detected (1000 hours) |
REPLACEMENT ELEMENT |
K009AA, K017AA, K030AA, K058AA, K145AA, K220AA, K330AA,
K430AA, K009AO, K017AO, K030AO, K058AO, K145AO, K220AO, K330AO,
K430AO, K009AR, K017AR, K030AR, K058AR, K145AR, K220AR, K330AR,
K430AR, K009ACS, K017ACS, K030ACS, K058ACS, K145ACS, K220ACS, K330ACS
|
HEIGHT (MM) |
210 to 698 |
HEIGHT (INCH) |
8.3 to 27.5 |
WIDTH (MM) |
145 to 300 |
WIDTH (INCH) |
5.7 to 11.8 |
DEPTH (MM) |
112 to 210 |
DEPTH (INCH) |
4.4 to 8.3 |
WEIGHT (KG) |
2.5 to 12 |
WEIGHT (LBS) |
5.5 to 26.4 |
BRAND |
Parker Domnick Hunter |
Dimensions in (mm) and weight lbs (kg)
Filter Grade Types: AO, AA, AR, ACS
*Scroll to the right to see entire chart on mobile.
Model |
Height in (mm) |
Width in (mm) |
Depth in (mm) |
Weight lbs (kg) |
(grade) 0009GSS |
8.3 (210) |
5.7 (145) |
4.4 (112) |
5.5 (2.5) |
(grade) 0017GSS |
9.3 (236) |
5.7 (145) |
4.4 (112) |
5.5 (2.5) |
(grade) 0030GSS |
10.6 (270) |
6.1 (154) |
4.4 (112) |
5.5 (2.5) |
(grade) 0058GSS |
15.0 (382) |
7.5 (190) |
5.8 (148) |
9.9 (4.5) |
(grade) 0080GSS |
19.9 (506) |
7.9 (200) |
5.8 (148) |
11.0 (5.0) |
(grade) 0145GSS |
19.9 (506) |
8.9 (225) |
5.8 (148) |
11.0 (5.0) |
(grade) 0220GSS |
24.7 (628) |
11.0 (280) |
8.3 (210) |
26.4 (10.0) |
(grade) 0330GSS |
36.9 (938) |
11.0 (280) |
8.3 (210) |
26.4 (10.0) |
(grade) 0405GSS |
27.5 (698) |
11.4 (290) |
8.3 (210) |
26.4 (10.0) |
(grade) 0430GSS |
27.5 (698) |
11.8 (300) |
8.3 (210) |
26.4 (10.0) |