Parker Domnick Hunter ThermalStar Series Refrigeration Air Dryers

Parker Domnick Hunter's ThermalStar Smart TM1250 - TM3000 configuration combines the advantages of superior performance and energy savings with the oil removal efficiency of a built-in, multi-stage separator/cold coalescer.

ThermalStar Smart Cycling Refrigerated Air Dryers adapt to operating conditions and ensure dewpoint control. This dryer boasts low operating costs, reliability, and energy savings, making it the ideal choice for industrial users.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): TM1250, TM1600, TM2050, TM2500, TM3000, TM4000, TM5000, TM6000, TM8000, TM10000, TM12500, TM15000

Costly contamination problems can be avoided by installing a TM1250 - TM3000 or TM4000 - TM15000 Cycling Refrigerated Air Dryer package complete with Parker Domnick Hunter filtration. The combination of our refrigerated dryers and high quality filtration provides air quality to ISO 8573.1 Class 1.4.1.

A refrigerated dryer is typically selected to achieve its design performance at the user's most extreme working conditions (ie. a warm summer day with the air compressor operating at maximum load). This maximum condition, however, is very rarely achieved in everyday conditions.

First, the air compressor load will vary significantly during a working day and will rarely be at full load, thereby significantly reducing the load on the dryer itself. Furthermore, average temperatures are well below the maximum inlet and ambient temperatures for which the system has been sized. Reduced temperatures at colder moments during the day and overall temperature reductions during the midseason and winter add a further reduction to the load on the dryer.

Features of Parker Domnick Hunter ThermalStar Series Air Dryers:
• Best in class dewpoint performance
• Tri Mode Operation allows dryer to operate in cycling, non-cycling or auto mode.
• Unlimited cycling due to unloaded “soft start”
• Multi-stage separation and filtration
• Level actuated drain
• Diagnostic readouts indicate need for service
• Drain light
• Alarm light
• Displays in English or Metric
• Serial Port with MODBUS
• Digital readout air in temperature
• Digital readout ambient or water in temperature
• High inlet temperature warning
• High ambient or water in temperature warning
• Optional eControl Center
• Lower dewpoint temperature achieved with ThermalStar Smart results in cleaner operation
• Longer lasting components
• Upstream malfunction that results in more severe inlet conditions can be readily handled without
• resulting in downstream problems
• Lower operating costs, with no sacrifice in performance
• Dryer runs only as needed
• Environmentally friendly refrigerant
• Tube and shell heat exchanger with grooved tube sheets provide greatest mechanical strength and lowest pressure drop
• Patented flood level control protects refrigeration circuit


Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-835-0649 or Toll Free at 800-761-4298.



*Scroll to the right to see entire chart on mobile devices.

PERFORMANCE CHARACTERISTICS
BRAND Parker Domnick Hunter
PRE-INSTALLED OPTIONAL ACCESSORIES Air Cooled Unit
CONNECTION TYPE 3" Flg, 4" Flg, 6" Flg, 8" Flg, 10" Flg, 12" Flg
MAXIMUM FLOW RATE (M³/H) 2123.76, 2718.42, 3482.97, 4247.53, 5097.03, 6796.04, 8495.05, 10194.06, 13592.09, 16990.11, 21237.63, 25485.16
RATED INLET PRESSURE (PSI) 100
MAXIMUM OPERATING PRESSURE (PSI) 200, 150
MINIMUM OPERATING PRESSURE (PSI) -
MAXIMUM OPERATING TEMPERATURE (F) 131
MINIMUM OPERATING TEMPERATURE (F) 41
MAXIMUM AMBIENT TEMPERATURE (F) 115
MINIMUM AMBIENT TEMPERATURE (F) 41
REFRIGERANT R404A
PREFILTER PART NUMBER AO055JNFI, DH-AO250ODFI-1, DH-AO350PDFI-1, DH-AO400QDFI-1, DH-AO450RDFI-1, DH-AO500SDFI-1
AFTER FILTER PART NUMBER AA055JNFI, DH-AA250ODFI-1, DH-AA300ODFI-1, DH-AA350PDFI-1, DH-AA400QDFI-1, DH-AA450RDFI-1, DH-AA500SDFI-1
INSTALLED CONDENSATE DRAIN Level Actuated
DRYER TECHNOLOGY Compressed Air –Refrigerated
TYPE ThermalStar Large Capacity Dryers Air Cooled


Dimensions and weight
*Scroll to the right to see entire chart on mobile devices.

Model
H in (mm)
W in (mm)
D in (mm)
Weight lbs (kg)
TM1250 65 (1651) 74 (1880) 41 (1041) 1850 (839)
TM1600 72 (1829) 78 (1981) 48 (1219) 2200 (998)
TM2050 76 (1930) 102 (2591) 54 (1372) 3000 (1361)
TM2500 76 (1930) 102 (2591) 54 (1372) 3370 (1529)
TM3000 85 (2159) 108 (2743) 66 (1676) 4015 (1821)
TM4000 95 (2413) 108 (2743) 68 (1727) 5680 (2576)
TM5000 95 (2413) 108 (2743) 68 (1727) 6415 (2910)
TM6000 95 (2413) 146 (3708) 76 (1930) 7725 (3504)
TM8000 95 (2413) 146 (3708) 76 (1930) 9610 (4359)
TM10000 95 (2413) 161 (4089) 83 (2108) 11020 (4999)
TM12500 111 (2819) 160 (4064) 94 (2388) 13250 (6010)
TM15000 120 (3048) 150 (3810) 100 (2540) 14600 (6623)



Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...