ecodry K-MT 1-4 Series Adsorption Air Dryers

The Parker Zander ecodry K-MT 1-4 range of heatless adsorption dryers are designed to dry industrial compressed air reliably and efficiently down to a pressure dew point of -70°C. The units are compact and can be installed either free-standing or wall mounted. They come equipped with integrated high performance pre- and after filtration and are capable of volume flows up to 35 m³/h in a system operating at 7 barg (100 psig).

Compact, heatless compressed air dryers for applications requiring volume flows up to 35m³/h @ 7 barg and dew points of -25°C to -70°C.

Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298

Get A Free Quote!

Model(s): K-MT 1, K-MT 2, K-MT 3, K-MT 4

Features & Benefits of Parker Zander K-MT 1-4 Series Air Dryers:
• Pressure dew points down to -70 °C
• Volume flows up to 35 m³/h @ 7 barg (100 psig)
• High performance pre- and after filters installed as standard
• FEnergy saving dew point dependent switching (DDS) as an option
• Highest quality air
• Compact and space saving
• Energy efficient
• Very flexible due to a wide range of options and accessories

Energy Savings
Where an application calls for a unit able to cope with variations in operating pressure and load, the installation of a dew point sensor at the outlet of the dryer is available as an option. In such an operating mode, the changeover cycle between chambers only takes place when required, and is dependent on the required dew point being achieved. Only upon reaching this adjustable set dew point, does changeover to the regenerated chamber occur. This feature enables the drying phase to be lengthened and thus avoids the unnecessary use of purge air for regeneration and consequently provides energy savings.

Compressed air can be selectively dried to meet a dew point of -25°C down to -70°C.

Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact us at 727-835-0649 or Toll Free at 800-761-4298.



PERFORMANCE CHARACTERISTICS
MAXIMUM FLOW RATE (CFM) 21 @ 101 psig / PDP -13°F and -40°F
MAXIMUM OPERATING PRESSURE (BARG) 16
MAXIMUM OPERATING PRESSURE (PSIG) 232
MINIMUM OPERATING PRESSURE (BARG) 5
MINIMUM OPERATING PRESSURE (PSIG) 72.5
MAXIMUM AMBIENT TEMPERATURE (C) 50
MINIMUM AMBIENT TEMPERATURE (C) 1.5
IP RATING 65
MAXIMUM OPERATING TEMPERATURE (C) 50
MAXIMUM OPERATING TEMPERATURE (F) 122
MINIMUM OPERATING TEMPERATURE (C) 25
MINIMUM OPERATING TEMPERATURE (F) 77
PORT SIZE ¼"
CONNECTION TYPE BSP-P DIN ISO 228 (ANSI B 1.20.1 NPT-F on request)
ELECTRICAL REQUIREMENTS 230V, 50-60Hz
CONTROLLER TYPE Multitronic
POWER CONSUMPTION 28
DRYER TECHNOLOGY Heatless Adsorption
PRESSURE DEWPOINT (C) - 25°C to - 70°C
PRESSURE DEWPOINT (F) - 13°F to - 97°F
CERTIFICATES PED 97/23/EG, module A, category I
BRAND Parker Zander
PREFILTER TYPE GL2XL
AFTERFILTER TYPE GL2ZLH


K-MT 1-4 Dimensions
Dimensions (mm) and weight (kg)
Model
A
B
C
D
E
Weight
K-MT 1 326 400 216 376 101 11.5
K-MT 2 326 575 216 551 101 15.5
K-MT 3 326 825 216 801 101 20
K-MT 4 326 1075 216 1051 101 25


Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air

Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...

 ✉ Email this Page