Click for Larger View
TWP Series Externally Heated Desiccant Air Dryers
Parker TWP Series Externally Heated Desiccant Air Dryers operate similarly to the TW series to achieve a pressure dewpoint of -40°F, but the design includes a heat source to assist the purge air during regeneration. This is called Thermal Swing Adsorption and helps reduce the energy required to regenerate the desiccant bed.
Call us TODAY at 727-835-0649 or
Toll Free at 800-761-4298
Get A Free Quote!
The TWP Series adds a heater to the regeneration process, this is called heated regeneration or thermal swing adsorption. The desiccant dryer is still designed to achieve -40°F PDP, but it includes a heater to reduce the amount of purge air required during regeneration. The regeneration time for the TWP series is extended to 8 hours to complete a full cycle.
Sizing and Model Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the Product Information Sheet.
For more information or a detailed discussion about your specific requirements please contact us at 727-835-0649 or Toll Free at 800-761-4298.
How to Order
6. Low Ambient Temperature Package option covers dryers with filter package N, F or B only. The dryer must also have NEMA 4 protection class. Consult mdi if Low Ambient Temperature Package option is required for a dryer with filter package D or a protection class other than NEMA 4.
7. TWP201-1201 come with float drain on pre-filter as standard. TWP1501 and larger come with both a demand drain and timed solenoid drain on pre-filter as standard. Timed solenoid drain option code T is available for TWP201-1201 only. Use option code Y if both Instrument Package options G & T are required for TWP201-1201.
*Scroll to the right to see entire chart.
4. Pressure relief valve variance +/- 10%. TWP201-1501 pressure relief valve set at 165 psig. TWP2001-7501 pressure relief valve set at 150 psig.
5. Control power = 120V / 1Ph / 60Hz
*Scroll to the right to see entire chart.
• Above information should be used as a guideline. Flows are at 100 psig inlet pressure, 100°F (38°C) inlet temperature and 100°F (38°C) ambient temperature. For specific applications, please consult mdi.
• Weight includes desiccant (shipped loose TWP2001 and up).
• Pressure relief valve variance +/- 10%.
Correction Factors
To obtain dryer capacity at new conditions, multiply nominal capacity x C1 x C2.*Scroll to the right to see entire chart.
*Scroll to the right to see entire chart.
*Scroll to the right to see entire chart.
Notes:
1. Dimensions shown on Models TWP201—TWP801 are with Package B.
2. Dimensions shown on Models TWP1001—TW3001 are with Package F.
3. Weight includes desiccant (shipped loose Models TWP2001 and up).
Filter Package Schematic
(Optional on all models)
Includes dryer with factory installed dual selectable pre and after-filters with system bypass.
(Standard on TWP1001 and larger)
Includes dryer with factory installed pre-filter and after-filter.
(Standard on TWP201 - TWP801)
Includes dryer with factory installed prefilter and after-filter with system bypass.
Also Available from mdi: Parker Transair Aluminum Pipe and Fittings for Compressed Air
Transair aluminum pipe is the ideal system for compressed air, vacuum, and inert gas applications. It offers significant savings on installation, maintenance and operating costs when compared to traditional compressed air piping systems. Its removable and interchangeable components allow users to easily modify production layouts or execute process changes within minutes. It's the only product with true push-to-connect fittings, eliminating the need to thread, solder or glue pipe. Its unique sealing technology guarantees Transair to be leak-free.
Continue...
